Dongming Zhu & Yanchun Zhou 
Advanced Ceramic Coatings and Materials for Extreme Environments, Volume 32, Issue 3 [PDF ebook] 

Preface ix

Introduction xi

ADVANCED COATING CHARCTERIZATION METHODSAND NON-DESTRUCTIVE EVALUATION

Monitoring Delamination of Thermal Barrier Coatings during Interrupted High-Heat-Flux Laser Testing using Upconversion Luminescence Imaging 3
Jeffrey I. Eldridge and Dongming Zhu, and Douglas E. Wolfe

Thermal Imaging Measurement Accuracy for Thermal Properties of Thermal Barrier Coatings 15
J. G. Sun

ADVANCED COATING PROCESSING AND NANOSTRUCTURED COATING SYSTEMS

High Velocity Suspension Flame Sprayed (HVSFS) Hydroxyapatite Coatings for Biomedical Applications 25
N. Stiegler, R. Gadow, and A. Killinger

COATINGS TO RESIST WEAR, EROSION, AND TRIBOLOGICAL LOADINGS

Ceramic/Metal-Polymer Multilayered Coatings for Tribological Applications Under Dry Sliding Conditions 39
A. Rempp, M. Widmann, P. Guth, A. Killinger, and R. Gadow

Application of HVOF for High Performance Cylinder Liner Coatings 51
A. Manzat, A. Killinger, and R. Gadow

Multilayer Coatings for Anti-Corrosion Applications 59
L. Lin, C. Qu, R. Kasica, Q. Fang, R. E. Miller, E. Pierce, E. Mccarty, J. H. Fan, D. D. Edwards, G. Wynick, and X. W. Wang

ENVIRONMENTAL BARRIER COATINGS FOR TURBINE ENGINES AND EXTREME ENVIRONMENTS

Plasma Spray-Physical Vapor Deposition (PS-PVD) of Ceramics for Protective Coatings 73
B. J. Harder and D. Zhu

An Yb2Si2O7 Oxidation Resistance Coating for C/C Composites by Supersonic Plasma Spray 85
Lingjun Guo, Minna Han, Hejun Li, Kezhi Li, and Qiangang Fu

FUNCTIONALLY GRADED COATINGS AND INTERFACES

Development of Oxide Ceramic APS Coatings for Microwave Absorption 93
M. Floristän, P. Müller, A. Gebhardt, A. Killinger, R. Gadow, A. Cardella, and C. Li

THERMAL BARRIER COATINGS

Hot Corrosion of Potential Thermal Barrier Coating Material (Sm1-x Ybx)2Zr2O7 by V205 and Na2SO4 109
Jia-Hu Ouyang, Sa Li, Zhan-Guo Liu, and Yu Zhou

Variation of Creep Properties and Interfacial Roughness in Thermal Barrier Coating Systems 129
P. Seiler, M. Baker, and J. Rosier

MATERIALS FOR EXTREME ENVIRONMENTS: ULTRA HIGH TEMPERATURE CERAMICS (UHTCS) AND NANOLAMINATED TERNARY CARBIDES AND NITRIDES (MAX PHASES)

Temperature and Strain-Rate Dependent Plasticity of Zr B2 Composites from Hardness Measurements 139
J. Wang, F. Giuliani, and L.J. Vandeperre

Nano-Crystalline Ultra High Temperature Hf B2 and Hf C Powders and Coatings Using a Sol-Gel Approach 151
S. Venugopal, A. Paul, B. Vaidhyanathan, J. Binner, A. Heaton, and P. Brown

Pressureless Sintering and Hot-Pressing of Ti2AIN Powders Obtained by SHS Process 161
L. Chlubny, J. Lis, M. M. Bucko, and D. Kata

Diffraction Study of Self-Recovery in Decomposed AI2Ti05 during Vacuum Annealing 169
I. M. Low and W. K. Pang

Kinetics of Phase Decomposition in Ti4AIN3 and Ti2AIN–A Comparative Diffraction Study 177
W. K. Pang, R. I. Smith, V. K. Peterson, and I. M. Low

Author Index 187

Dr. Dongming Zhu is a senior materials research engineer at NASA Glenn Research Center. He is an internationally recognized leader in the area of turbine engine coating technology with over 15 years of professional experience. He has led the development of new environmental barrier coatings for future generations of turbine engines, and he has also led the development of advanced laboratory test techniques for evaluating performance of advanced turbine engine coatings. He received his B.S. and M.S. degrees in Materials Science and Engineering from Hefei University of Technology, Hefei, China. He received his Ph.D. in Chemical Engineering and Materials Science from the University of Minnesota.

Hua-Tay Lin currently is a Distinguished Professor of Guangdong University of Technology, Guangzhou, China, and the Editor-in-Chief of the International Journal of Applied Ceramic Technology. He is Academician of World Academy of Ceramic, and Fellow of ASM International and the American Ceramic Society. His researches mainly focus on mechanical reliability of advanced ceramic components and electronic devices, high-temperature mechanical performance of ceramics and composites, and engineering design of microstructure and properties of ceramics and composites for clean energy and energy efficiency technologies, and coatings.

Yanchun Zhou holds a BSc in ceramics from Tsinghua University, and a M.S. in ceramics and Ph.D. in metals from Institute of Metal Research, Chinese Academy of Sciences. He was a visiting scientist at the Institute of Strength Physics and Materials, Russian Academy of Sciences, and a post doctoral associate at University of Missouri-Rolla in the 1990’s. He was Professor and Director of High-performance Ceramic Division, Shenyang National Laboratory for Materials Science before moving to Aerospace Research Institute of Materials and Processing Technology in 2010. He has published more than 400 papers in peer-reviewed international journals with citations of ca 11000 times and H-index of 55.