Experimental and Applied Mechanics, Volume 4 of the Proceedings of the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fourth volume of ten from the Conference, brings together contributions to important areas of research and engineering. The collection presents early findings and case studies on a wide range of topics, including:
- Hybrid Experimental & Computational Techniques
- Advanced Experimental Mechanics Methods
- Integration of Models & Experiments
- Soft Materials
- Education & Research in Progress
- Applications
Inhaltsverzeichnis
1 Numerical Analysis of Stress Strain Fluctuations in Coiled Tubing During Deepwater Deployment.- 2 Determining SIFs Using DIC Considering Crack Closure and Blunting.- 3 Characterization of Sub-surface Damage During the Early Stage of Stress Corrosion Cracking by Nano-indentation.- 4 In-situ Tensile Test On 316H SENT Using Digital Image Correlation.- 5 Development of Glass Steel Bibeam Specimen for Study of Brittle Crack Path Stability.- 6 Construction Procedure of Spot Weld Failure Model for Crash Simulation.- 7 Characterization and Modeling of Polymeric Foam Under Multi-Axial Static and Dynamic Loading.- 8 Cyclic Loading Experiment for Characterizing Foam Viscoelastic Behavior.- 9 Compression Testing of Aged Low Density Flexible Polyurethane Foam.- 10 A Micromechanical Characterization of Critical State.- 11 Studying the Influence of the Reclaimed Asphalt Pavement RAP on Local Deformation Properties of Asphalt Mixtures.- 12 Measurement of Structural Stresses by Hole Drilling and DIC.- 13 Assessment of Wood Properties Under Compression and Drying at the Ring Scale with the Grid Method.- 14 Compression Testing of Silica Microspheres with Synchronized SEM Video.- 15 Viscoelastic Relaxation of HEMA DMAEMA Responsive Hydrogels.- 16 A Simulator to Optimize the Experimental Set-up for Elasto-plastic Material Characterization.- 17 Constitutive Response of AA7075 T6 Aluminum Alloy Sheet in Tensile and Shear Loading.- 18 Constitutive Model Calibration via Autonomous Multiaxial Experimentation.- 19 New Methodology for Steady-State Friction Measurements of Granular Materials Under Pressure.- 20 Effect of Specimen Holder on Static and Fatigue Tests on Titanium/Cement Interfaces.- 21 Mechanical Behavior and Aluminization of Cu21Zn6Al Alloys.
Über den Autor
Dr. Yong Zhu – North Carolina State University, USA; Alan Zehnder –Cornell University, USA
Ebooks vom selben Autor / Herausgeber
16.308 Ebooks in dieser Kategorie
