Advances in Engineering Research and Application

Duy Cuong Nguyen & Do Trung Hai

Duy Cuong Nguyen & Do Trung Hai
Advances in Engineering Research and Application [PDF ebook]
Proceedings of the International Conference on Engineering Research and Applications, ICERA 2023, Volume 2

समर्थन

का आवरण Duy Cuong Nguyen & Do Trung Hai: Advances in Engineering Research and Application (PDF)

This book covers the International Conference on Engineering Research and Applications (ICERA 2023), which was held on December 1–2, 2023 at Thai Nguyen University of Technology in Thai Nguyen, Vietnam, and provided an international forum to disseminate information on latest theories and practices in engineering research and applications. The conference focused on original research work in areas including mechanical engineering, materials and mechanics of materials, mechatronics and micro mechatronics, automotive engineering, electrical and electronics engineering, information and communication technology. By disseminating the latest advances in the field, the proceedings of ICERA 2023, Advances in Engineering Research and Application, assists academics and professionals alike to reshape their thinking on sustainable development.

€192.59

विषयसूची

Experimental study for superheated steam drying of apple slice.- High Quality Torque for Five-phase Open-end Winding Non-sinusoidal Permanent Magnet Synchronous Machine Drives.- Hoang Linh Nguyen, Minh Son Nguyen, The Quang Tran, Toan Thang To, Van Thanh Vuong, The Hung Dinh and Van Truong Do.- Hybrid energy storage on electric vehicles.- Identifying Best Input Elements in PMEDM 90Cr Si Steel by MAIRCA Method.- Improvement of motion stability for AGV using Pure-Pursuit path tracking algorithm.- Influence of Dressing Parameters on Wheel Life in Surface Grinding Hardox 500.- Influence of the Nd Fe B permanent magnet on working characteristics of LSPMSM.- Interative learning control (ILC) for nonlinear system with slow variable parameter and noise, applications for wastewater treatment plantcontribution.- Interface Formation Induced by Friction Stir Welded Tool Offset in T-lap Joint of AA7075 and AA5083.- Investigate a folding mechanism using cylinder for operation.- Investigation of the particle velocity of the amorphous powder.- Investigations on Drilling of Al/CFRP/Ti Stacks using Micro Grooved drills.- Kinematic model and fast-terminal sliding mode for four-Mecanum-wheeled mobile robot.

यह ईबुक खरीदें और 1 और मुफ़्त पाएं!

भाषा अंग्रेज़ी ● स्वरूप PDF ● पेज 519 ● ISBN 9783031622359 ● फाइल का आकार 82.2 MB ● आयु 02-99 वर्षों ● संपादक Duy Cuong Nguyen & Do Trung Hai ● प्रकाशक Springer Nature Switzerland ● शहर Cham ● देश CH ● प्रकाशित 2024 ● डाउनलोड करने योग्य 24 महीने ● मुद्रा EUR ● आईडी 9601176 ● कॉपी सुरक्षा सामाजिक DRM

एक ही लेखक से अधिक ईबुक / संपादक

Duy Cuong Nguyen Do Trung Hai Ngoc Pi Vu Banh Tien Long Horst Puta Kai-Uwe Sattler

5,485 इस श्रेणी में ईबुक

E. J. H. Jones: Production Engineering – Jig And Tool Design

This early work by E. J. H. Jones is both expensive and hard to find in its first edition. Its 334 pages contain a wealth of information on jig and tool design including chapters on materials, gauges …

Frederick Hugh Sykes: Aviation In Peace And War

This vintage book contains a fascinating history of aviation, being a detailed exploration of its development and utility in peace and in war. This fantastic volume contains a wealth of information o …

J. H. Van House: Modern Electro-Plating

This early works on ‘Modern Electro Plating’ is a comprehensive and informative look at the subject detailing the principles involved in depositing Gold, Silver, Nickel, Copper, Brass and Other Metal …

William Henry Ford: Boiler Making for Boiler Makers – A Practical Treatise on Work in the Shop

A practical treatise on work in the shop, showing the best method of riveting, bracing and staying, punching, drilling, smithing and the most economical manner of obtaining the best quality of output …

Edwin Mather Wyatt: Blue Print Reading; Interpreting Working Drawings

This book is the result of several years teaching of blueprint reading in night schools and several years teaching of drafting preceding used for three years in blueprint and mimeographed tried out. …

O. S. Nock: The Locomotives of Sir Nigel Gresley

A book perfect for train enthusiasts, Gresley is one of Britain’s greatest steam locomotive engineers of all time and here are some of the masterpieces he designed and built. …

H. H. Rice: Concrete-Block Manufacture – Processes and Machines

This early work on concrete-block manufacture is both expensive and hard to find in its first edition. It contains a wealth of information on the science, processes and machines involved in concrete …

Disston Henry: Disston Lumberman Handbook – Containing A Treatise Of The Construction Of Saws And How To Keep Them In Order

This early work on saws is both expensive and hard to find in its first edition. It contains details on the construction of a variety of saws and also the methods of their maintenance such as sharpen …

Burr Bassell: Earth Dams, A Study

The earth dam is probably the oldest type of dam in existence, The litera- antedating the Christian Era many hundreds of years. ture upon this subject is voluminous, but much of it is inaccessible an …

Julius Von Sachs: History Of Botany (1530-1860)

Julius von Sachs (1832-1897) was a German botanist from Breslau, Prussian Silesia. In Sachs ‘History of Botany’ he has made it his chief object to discover the first dawning of scientific ideas and t …

ERROR	我们很抱歉 - 尽管我们做到了最好：发生了错误
Type	database
Message	You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near "AND SUBSTRING(categories_id,4,1) != "0") AS cat4, (SELECT categorie..." at line 5
Query	SELECT (SELECT categories_id FROM categories_description WHERE language_id = 13 AND categories_id = 000) AS cat1, (SELECT categories_id FROM categories_description WHERE language_id = 13 AND categories_id = 00 AND SUBSTRING(categories_id,2,1) != "0") AS cat2, (SELECT categories_id FROM categories_description WHERE language_id = 13 AND categories_id = 0 AND SUBSTRING(categories_id,3,1) != "0") AS cat3, (SELECT categories_id FROM categories_description WHERE language_id = 13 AND categories_id = AND SUBSTRING(categories_id,4,1) != "0") AS cat4, (SELECT categories_name FROM categories_description WHERE language_id = 13 AND categories_id = 000) AS cat1name, (SELECT categories_name FROM categories_description WHERE language_id = 13 AND categories_id = 00 AND SUBSTRING(categories_id,2,1) != "0") AS cat2name, (SELECT categories_name FROM categories_description WHERE language_id = 13 AND categories_id = 0 AND SUBSTRING(categories_id,3,1) != "0") AS cat3name, (SELECT categories_name FROM categories_description WHERE language_id = 13 AND categories_id = AND SUBSTRING(categories_id,4,1) != "0") AS cat4name, (SELECT url_text FROM commerce_seo_url_without_language WHERE categories_id = 000) AS cat1url, (SELECT url_text FROM commerce_seo_url_without_language WHERE categories_id = 00 AND SUBSTRING(categories_id,2,1) != "0") AS cat2url, (SELECT url_text FROM commerce_seo_url_without_language WHERE categories_id = 0 AND SUBSTRING(categories_id,3,1) != "0") AS cat3url, (SELECT url_text FROM commerce_seo_url_without_language WHERE categories_id = AND SUBSTRING(categories_id,4,1) != "0") AS cat4url, (SELECT wod_count_products FROM categories WHERE categories_id = 000) AS cat1cnt, (SELECT wod_count_products FROM categories WHERE categories_id = 00 AND SUBSTRING(categories_id,2,1) != "0") AS cat2cnt, (SELECT wod_count_products FROM categories WHERE categories_id = 0 AND SUBSTRING(categories_id,3,1) != "0") AS cat3cnt, (SELECT wod_count_products FROM categories WHERE categories_id = AND SUBSTRING(categories_id,4,1) != "0") AS cat4cnt

ERROR

विषयसूची

एक ही लेखक से अधिक ईबुक / संपादक

5,485 इस श्रेणी में ईबुक

उपयोगकर्ता की भाषा बदलें

Modal