Paul D. Franzon & Erik Jan Marinissen 
Handbook of 3D Integration [PDF ebook] 
Vol. 4: Design, Test, and Thermal Management

PART I: Design
# 01 3D Design Styles
# 02 Ultra-Fine Pitch 3D-Stacked Integrated Circuits: Technology, Design Enablement and Application
# 03 Power Delivery Network and Integrity in 3D IC Chips
# 04 Multiphysics Challenges and Solutions for Design of Heterogeneous 3D-Integrated Systems
# 05 Physical Design Flow for 3D/Co Wo S¿ Stacked ICs
# 06 Design and CAD Solutions for Cooling and Power Delivery for Monolithic 3D Ics
# 07 Electronic Design Automation for 3D
# 08 3D Stacked DRAM Memories
PART II: Test
# 09 Cost Modelling for 2.5D and 3D Stacked ICs
# 10 Interconnect Testing for 2.5D- and 3D-SICs
# 11 Pre-Bond Testing Through Direct Probing of Large-Array Fine-Pitch Micro-Bumps
# 12 3D Design-for-Test Architecture
# 13 Optimization of Test-Access Architectures and Test Scheduling for 3D ICs
# 14 IEEE P1838 3D Test Access Standard-in-Development
# 15 Test and Debug Strategy for TSMC Co Wo S¿ Stacking Process Based Heterogeneous 3D IC: A Silicon Study

PART III: Thermal Management
# 16 Thermal isolation and cooling technologies for heterogeneous 3-D and 2.5-D ICs
# 17 Passive and Active Thermal Technologies: Modeling and Evaluation
# 18 Thermal Modeling and Experimental Model Validation for 3D Stacked ICs
# 19 On the Thermal Management of 3D ICs: from back-side, to volumetric heat removal

Paul D. Franzon is currently the Cirrus Logic Distinguished Professor of Electrical and Computer Engineering and Director of Graduate programs in ECE at North Carolina State University. He earned his Ph D from the University of Adelaide, Adelaide, Australia. He has also worked at AT&T Bell Laboratories, DSTO Australia, Australia Telecom and four companies he cofounded, Communica, Light Spin Technologies, Polymer Braille Inc. and Avago. His current interests include applying machine learning to EDA, building machine learning accelerators, neuromorphic computing, RFID, advanced packaging, 3DICs and secure chip design. He has lead several major efforts and published over 300 papers in these areas. In 1993 he received an NSF Young Investigators Award, in 2001 was selected to join the NCSU Academy of Outstanding Teachers, in 2003, selected as a Distinguished Alumni Professor, received the Alcoa Research Award in 2005, and the Board of Governors Teaching Award in 2014. He served with the Australian Army Reserve for 13 years as an Infantry Soldier and Officer. He is a Fellow of the IEEE.
Erik Jan Marinissen is Principal Scientist at IMEC in Leuven, Belgium and part-time Visiting Researcher at Eindhoven University of Technology in the Netherlands. Prior to IMEC, he worked at NXP Semiconductors and Philips Research in Eindhoven, Nijmegen, and Sunnyvale (CA). His research on IC test and design-for-test covers topics as diverse as modular test of So Cs, 3D-stacked ICs, CMOS below 10nm, silicon photonics, and STT-MRAMs. Marinissen received the MSc degree in computing science and the PDEng degree in software technology from Eindhoven University of Technology. An IEEE Fellow, he is a co-author of more than 275 journal and conference papers and a co-inventor of 18 granted patent families. He served as editor-in-chief of IEEE Std 1500 and as founder/chair of the IEEE Std P1838 Working Group on 3D-SIC test access. In 2019-2021, he serves on the Board of Governors of IEEE Computer Society.
Muhannad S. Bakir is a Professor in the School of Electrical and Computer Engineering at the Georgia Institute of Technology. He is a recipient of the 2018 IEEE Electronics Packaging Society (EPS) Exceptional Technical Achievement Award ‘for contributions to 2.5D and 3D IC heterogeneous integration, with focus on interconnect technologies’. He is also a recipient of the 2018 Mc Knight Foundation Technological Innovations in Neuroscience Award, 2013 Intel Early Career Faculty Honor Award, 2012 DARPA Young Faculty Award, and 2011 IEEE EPS Outstanding Young Engineer Award. He has published more than 200 journal and conference papers in the areas of 2.5D and 3D IC heterogeneous integration, power delivery, embedded cooling, photonic interconnects, and flexible interconnects. Dr. Bakir serves on the editorial board of IEEE Transactions on Components, Packaging and Manufacturing Technology (TCPMT) and IEEE Transactions on Electron Devices (TED). He is a Distinguished Lecturer for IEEE EPS.
Philip Garrou is a consultant and expert witness in the field of IC packaging materials and applications, prior to which he was Director of Technology and Business Development for Dow Chemicals’ Electronic Materials business. He is author of the weekly blog ‘Insights from the Leading Edge’ (IFTLE) at www.3Dincites.com.
Mitsumasa Koyanagi is Professor in the Graduate School of Engineering at Tohoku University, Japan. After his Ph D he joined the Central Research Laboratory of Hitachi where he was engaged in the research on semiconductor memories. Afterwards he worked at the Xerox Palo Alto Research Center in California, USA, before he became Professor in the Research Center for Integrated Systems at Hiroshima University, Japan.
Peter Ramm is Head of Strategic Projects at Fraunhofer EMFT in Munich, Germany. He received Physics and Dr. rer. nat. degrees from the University of Regensburg and subsequently worked for Siemens in their DRAM facility in Regensburg, where he was responsib