A practical and highly popular guide for electrical contractors
of small installations, now fully revised in accordance with the
latest wiring regulations
The book is a clearly written practical guide on how to design
and complete a range of electrical installation projects in a
competitive manner, while ensuring full compliance with the new
Wiring Regulations (updated late 2008). The updated regulations
introduced changes in terminology, such as ‘basic’ and
‘fault protection’, and also changed the regulation
numbers. This new edition reflects these changes. It discusses new
sections covering domestic, commercial, industrial and agricultural
projects, including material on marinas, caravan sites, and small
scale floodlighting. This book provides guidance on certification
and test methods, with full attention given to electrical safety
requirements. Other brand new sections cover protective
measures, additional protection by means of RCDs, the new cable
guidelines for thin wall partitions and Part P of the Building
Regulations.
* Provides simple, practical guidance on how to design electrical
installation projects, including worked examples and case
studies
* Covers new cable guidelines and Part P of the Building
Regulations (Electrical Installations) in line with 17th
edition of the Wiring Regulations BS 7671:2008
* New chapters on protective measures and additional protection
by means of RCDs (residual current devices)
* Features new wiring projects such as marinas, caravan sites and
small scale floodlighting and street lighting
* Fully illustrated, including illustrations new to the fourth
edition
Yazar hakkında
Mr. Bill Atkinson (deceased) Bill Atkinson was the
writer’s pseudonym used by Alan Smith, the original author of the
book. He worked in the electrical installation industry and at the
NICEIC.
Mr. Roger Lovegrove, Consultant, Surrey, UK Roger
Lovegrove is an electrical consultant. He is a member of the
Electrical Contractors’ Association techinical committees and of
the joint IEE/BSI Wiring Regulations committee. With his vast
knowledge in this area of electrical engineering, he has updated
Bill Atkinson’s original text for this fourth edtition.
Mr. Gary Gundry, Senior Engineer, Electrical
Safety Council, UK Mr Gundry worked for Seeboard and
Eastern Electricity, before becoming a lecturer at Lowestoft
College, teaching electrical contracting and electrical engineering
up to HNC level. He joined NICEIC in 1999 after spending three
years as a Director and Qualified Supervisor of a business enrolled
as an Approved Contractor, where he worked in the Standards
division on the NICEIC Technical Manual. He is now Senior Engineer
at Electrical Safety Council.
Mr. Martyn Allen, Senior Engineer, Electrical
Safety Council Martyn Allen’s experience in the electrical
installation industry spans 30 years. He served an apprenticeship
and worked as an electrician with British Coal, spent 16 years in
engineering insurance risk management and then joined the
Electrical Safety Council. He is a Chartered Electrical Engineer
and Corporate Member of the IET. He is a member of the Joint
Technical Committee JPEL/64 Panel C – Shock Protection and
Isolation and Switching.
Aynı yazardan daha fazla e-kitap / Editör
18.579 Bu kategorideki e-kitaplar
