The Ninth International Symposium on Solid Oxide Fuel Cells: Materials, Science, and Technology was held in January 2012 as part of the 36th International Conference on Advanced Ceramics and Composites (ICACC). This symposium provided an international forum for scientists, engineers, and technologists from around the world to present and discuss the latest advances in solid oxide fuel cells. This issue features fourteen papers selected from the symposium, offering readers a broad panorama of the current status of solid oxide fuel cells technology, as well as emerging issues and future directions in the field.
Зміст
Preface vii
Introduction ix
Investigation of Novel Solid Oxide Fuel Cell Cathodes Based on Impregnation of Sr Tix Fe1_x03_5 into Ceria-Based Backbones 1
M. Brinch-Larsen, M. Sogaard, J. Hjelm and H. L. Frandsen
Freeze-Tape Casting for the Design of Anode-Delivery Layer in Solid Oxide Fuel Cells 13
Jacob Bunch, Yu Chen, Fanglin Chen, and Matthew May
Tailoring the Anode Microstructure in Micro-Tubular SOFCS by the Optimization of the Slurry 23
Michele Casarin, Riccardo Ceccato, and Vincenzo M. Sglavo
Mixed Conducting Praseodymium Cerium Gadolinium Oxide (PCGO) Nano-Composite Cathode for ITSOFC Applications 35
Rajalekshmi Chockalingam, Ashok Kumar Ganguli, and Suddhasatwa Basu
Development of GDC-(Li Na)C03 Nano-Composite Electrolytes For Low Temperature Solid Oxide Fuel Cells 47
Rajalekshmi Chockalingam, Ashok Kumar Ganguli, and Suddhasatwa Basu
Weibull Strength Variations between Room Temperature and High Temperature Ni-3YSZ Half-Cells 61
Declan J. Curran, Henrik Lund Frandsen, and Peter Vang Hendriksen
In-Situ XRD of Operating LSFC Cathodes: Development of a New Analytical Capability 71
John S. Hardy, Jared W. Templeton, and Jeffry W. Stevenson
Proton Conduction Behaviors in Ba- and Mg-Doped La Ga Os 85
Xuan Zhao, Nansheng Xu, Kevin Romito, Kevin Huang, Alisha Lucas, and Changyong Qin
Silver-Palladium Alloy Electrodes for Low Temperature Solid Oxide Electrolysis Cells (SOEC) 93
Michael Keane and Prabhakar Singh
Development of Improved Tubular Metal-Supported Solid Oxide Fuel Cells Towards High Fuel Utilization Stability 105
L. Otaegui, L. M. Rodriguez-Martinez, M. A. Alvarez, F. Castro, and I. Villarreal
Highlighting DOE EERE Efforts for the Development of SOFC Systems for APU and Stationary Applications 117
David R. Peterson, Jacob S. Spendelow, and Dimitrios C. Papageorgopoulos
Efficient Planar SOFC Technology for a Portable Power Generator 125
Andreas Poenicke, Sebastian Reuber, Christian Dosch, Stefan Megel, Mihails Kusnezoff, Christian Wunderlich, and Alexander Michaelis
Investigation of Ni-Yttha Stabilized Zirconia Anode for Solid-Oxide Fuel Cell using XAS Analysis 137
Koichi Hamamoto, Toshio Suzuki, Bo Liang, Toshiaki Yamaguchi, Hirofumi Sumi, Yoshinobu Fujishiro, Brian Ingram, A. Jeremy Kropf, and J. David Carter
Processing of Gadolinium-Doped Ceria Electrolyte Layers with a Thickness of ~1 mm: Thin Film Wet Coating Methods and PVD 145
Tim Van Gestel, Hyo-Jeong Moon, Doris Sebold, Sven Uhlenbruck, and Hans Peter Buchkremer
Author Index 159
Про автора
Prabhakar Singh, Ph D, holds the United Technologies Corporation Endowed Chair Professor position in the Department of Materials Science and Engineering, and was the Director of the Center for Clean Energy Engineering at the University of Connecticut.