A real-time system is a complex system which is an integral part
of an industrial or experimental system, a vehicle or a
construction machine. The peculiarity of these systems is that they
are driven by real-time targets in distributed environments.
Command-control for Real-time Systems presents the calculation of
correction for industrial systems of different physical natures,
their implementation on real-time target industrial systems
(PLC-SCADA, embedded systems with distributed networks, Networked
Control Systems) and their validation by simulation. It optimizes
industrial processes by the use of automatic tools, industrial
computing and communications networks and aims to successively
integrate new control laws (linear, nonlinear and fuzzy
controllers) so that users can leverage the power of engineering
science as an automatic service process optimization while
maintaining their high maintainability facilities.
Contents
1. Introduction.
2. Modeling Tools, Sébastien Cabaret and Mohammed
Chadli.
3. Control Tools, Mohammed Chadli and Hervé Coppier.
4. Application to Cryogenic Systems, Marco Pezzetti, Hervé
Coppier and Mohammed Chadli.
5. Applications to a Thermal System and to Gas Systems,
Sébastien Cabaret and Hervé Coppier.
6. Application to Vehicles, Elie Kafrouni and Mohammed
Chadli.
7. Real-time Implementation, Marco Pezzetti and Hervé
Coppier.
About the Authors
Mohamed Chadli is a senior lecturer and research supervisor at
the University of Picardie Jules Verne (UPJV) in France. His main
research interests lie in robust control, the diagnosis and fault
tolerant control of polytopic systems and applications for
automobiles. He is a senior member of the IEEE, and Vice President
of the AAI Club as part of SEE-France. He is the author/co-author
of 3 books, book chapters and more than 100 articles published in
international journals and conferences.
Hervé Coppier is a lecturing researcher at ESIEE-Amiens in
France. He has collaborated with industrialists in the field of
automation and industrial computing, particularly with CERN, and
has spearheaded various international European projects.
of an industrial or experimental system, a vehicle or a
construction machine. The peculiarity of these systems is that they
are driven by real-time targets in distributed environments.
Command-control for Real-time Systems presents the calculation of
correction for industrial systems of different physical natures,
their implementation on real-time target industrial systems
(PLC-SCADA, embedded systems with distributed networks, Networked
Control Systems) and their validation by simulation. It optimizes
industrial processes by the use of automatic tools, industrial
computing and communications networks and aims to successively
integrate new control laws (linear, nonlinear and fuzzy
controllers) so that users can leverage the power of engineering
science as an automatic service process optimization while
maintaining their high maintainability facilities.
Contents
1. Introduction.
2. Modeling Tools, Sébastien Cabaret and Mohammed
Chadli.
3. Control Tools, Mohammed Chadli and Hervé Coppier.
4. Application to Cryogenic Systems, Marco Pezzetti, Hervé
Coppier and Mohammed Chadli.
5. Applications to a Thermal System and to Gas Systems,
Sébastien Cabaret and Hervé Coppier.
6. Application to Vehicles, Elie Kafrouni and Mohammed
Chadli.
7. Real-time Implementation, Marco Pezzetti and Hervé
Coppier.
About the Authors
Mohamed Chadli is a senior lecturer and research supervisor at
the University of Picardie Jules Verne (UPJV) in France. His main
research interests lie in robust control, the diagnosis and fault
tolerant control of polytopic systems and applications for
automobiles. He is a senior member of the IEEE, and Vice President
of the AAI Club as part of SEE-France. He is the author/co-author
of 3 books, book chapters and more than 100 articles published in
international journals and conferences.
Hervé Coppier is a lecturing researcher at ESIEE-Amiens in
France. He has collaborated with industrialists in the field of
automation and industrial computing, particularly with CERN, and
has spearheaded various international European projects.
€139.99
Mục lục
1. Introduction.2. Modeling Tools, Sébastien Cabaret and Mohammed Chadli.
3. Control Tools, Mohammed Chadli and Hervé Coppier.
4. Application to Cryogenic Systems, Marco Pezzetti, Hervé Coppier and Mohammed Chadli.
5. Applications to a Thermal System and to Gas Systems, Sébastien Cabaret and Hervé Coppier.
6. Application to Vehicles, Elie Kafrouni and Mohammed Chadli.
7. Real-time Implementation, Marco Pezzetti and Hervé Coppier.
Giới thiệu về tác giả
Mohamed Chadli is a senior lecturer and research supervisor at the University of Picardie Jules Verne (UPJV) in France. His main research interests lie in robust control, the diagnosis and fault tolerant control of polytopic systems and applications for automobiles. He is a senior member of the IEEE, and Vice President of the AAI Club as part of SEE-France. He is the author/co-author of 3 books, book chapters and more than 100 articles published in international journals and conferences.Hervé Coppier is a lecturing researcher at ESIEE-Amiens in France. He has collaborated with industrialists in the field of automation and industrial computing, particularly with CERN, and has spearheaded various international European projects.
Mua cuốn sách điện tử này và nhận thêm 1 cuốn MIỄN PHÍ!
Ngôn ngữ Anh ● định dạng PDF ● Trang 384 ● ISBN 9781118578964 ● Kích thước tập tin 17.8 MB ● Biên tập viên Mohammed Chadli & Herve Coppier ● Nhà xuất bản John Wiley & Sons ● Được phát hành 2013 ● Phiên bản 1 ● Có thể tải xuống 24 tháng ● Tiền tệ EUR ● TÔI 2675599 ● Sao chép bảo vệ Adobe DRM
Yêu cầu trình đọc ebook có khả năng DRM
Thêm sách điện tử từ cùng một tác giả / Biên tập viên
18.413 Ebooks trong thể loại này
