The Basics of Troubleshooting in Plastics Processing is a
condensed practical guide that gives the reader a broad
introduction to properties of thermoplastics plastics, additives,
the major processes (extrusion, injection molding, rotational
molding, blow molding, and thermoforming), as well as
troubleshooting. The main goal is to provide the plastics
processor with an improved understanding of the basics by
explaining the science behind the technology. Machine details are
minimized as the emphasis is on processing problems and the defects
in an effort to focus on basic root causes to problems and how to
solve them.
The book’s framework is troubleshooting in plastics
processing because of the importance it has to the eventual
production of high quality end products. Each chapter contains both
practical and detailed technical information.
This basic guide provides state-of-the-art information on:
* Processing problems and defects during manufacturing
* Plastics materials, their properties and characterization
* The plastics processing techniques
* Plastics additives
* Troubleshooting of the 5 main plastics processes
* References for further reading
Mục lục
Preface.
1. Introduction.
1.1 Market Trends.
1.2 Importance of Plastics.
1.3 Plastics Processing.
1.4 Fundamental.
References.
2. Plastics Materials.
2.1 Properties and Processing.
2.2 Polyethylene.
2.3 Polypropylene (PP).
2.4 Polystyrene.
2.5 Polyvinylchloride (PVC).
2.6 Engineering Plastics.
2.7 Advantages.
2.8 Fundamental.
References.
3. Plastics Additives.
3.1 Antioxidants.
3.2 Anti-block Agents.
3.3 Antistatic Agent.
3.4 Clarifying Agents.
3.5 Slip Additives.
3.6 Processing Aids.
3.7 Antifogging Agents.
3.8 Antiblocking Agents.
3.9 Heat Stabilizers.
3.10 Lubricants.
3.11 Plasticizers.
3.12 Coupling Agents or Surface Modifiers.
3.13 Release Agents.
3.14 Flame Retardants.
3.15 Pigments.
3.16 Light Stabilizers.
3.17 Impact Modifiers.
3.18 Blowing Agents.
3.19 Nucleating Agents.
3.20 Biocides.
3.21 Fillers.
3.22 Fundamentals.
References.
4. Plastics Processing.
4.1 Focus on Plastics Processing.
4.2 Injection Molding.
4.3 Extrusion.
4.4 Blow Molding.
4.5 Thermoforming.
4.6 Rotational Molding.
4.7 Fundamental.
References.
5. Troubleshooting – Problems and Solutions.
5.1 Troubleshooting – Requirements.
5.2 Injection Molding – Troubleshooting.
5.3 Troubleshooting – Extrusion.
5.4 Troubleshooting – Blow molding.
5.5 Troubleshooting – Thermoforming.
5.6 Troubleshooting – Rotational molding.
References.
6. Future Trends.
6.1 Productivity.
6.2 Automotive Applications.
6.3 Medical Applications.
6.4 Environmental Issues.
6.5 Fundamentals.
References.
Index.
Giới thiệu về tác giả
Muralisrinivasan Subramanian is a plastics technology consultant
specializing in materials, additives, and processing equipment,
including troubleshooting. He obtained his B.Sc in Chemistry from
the Madurai Kamaraj University and his M.Sc (1988) in Polymer
Technology from Bharathiar University. He received his Post
Graduate Diploma in Plastics Processing Technology from CIPET,
Chennai. He has also completed his Doctor of Philosophy in Polymer
Science from Madurai Kamaraj University. Dr. Subramanian has worked
in the plastics process industry, mainly in R & D, for 13 years
before turning to consultancy and building up an internatioanal
client base. In 2010 he published Update on Troubleshooting in
Thermoforming with i Smithers Rapra Publishing.
Thêm sách điện tử từ cùng một tác giả / Biên tập viên
27.977 Ebooks trong thể loại này
