Catalog > Naturwissenschaft > Technik > Maschinenbau, Fertigungstechnik > Commission on Engineering and Technical Systems & Committee on Beam Technologies: Opportunities in Attaining Fully Integrated Processing Systems: Beam Technologies for Integrated Processing (PDF)

Commission on Engineering and Technical Systems & Committee on Beam Technologies: Opportunities in Attaining Fully Integrated Processing Systems
Beam Technologies for Integrated Processing [PDF ebook]

Support

Cover von Commission on Engineering and Technical Systems & Committee on Beam Technologies: Opportunities in Attaining Fully Integrated Processing Systems: Beam Technologies for Integrated Processing (PDF)

Beam technologies play an important role in microelectronic component fabrication and offer opportunities for application in other manufacturing schemes. Emerging beam technologies that incorporate potential for sensors, control, and information processing have created new opportunities for integrated processing of materials and components.This volume identifies various beam technologies and their applications in electronics and other potential manufacturing processes. Recommendations for research and development to enhance the understanding, capabilities, and applications of beam technologies are presented.

€19.27

Dieses Ebook kaufen – und ein weitere GRATIS erhalten!

Sprache Englisch ● Format PDF ● Seiten 106 ● ISBN 9780309583954 ● Verlag National Academies Press ● Erscheinungsjahr 1992 ● herunterladbar 3 mal ● Währung EUR ● ID 7147441 ● Kopierschutz Adobe DRM

erfordert DRM-fähige Lesetechnologie

Ebooks vom selben Autor / Herausgeber

Commission on Engineering and Technical Systems Committee on Beam Technologies: Opportunities in Attaining Fully Integrated Processing Systems Division on Engineering and Physical Sciences National Materials Advisory Board National Research Council

16.308 Ebooks in dieser Kategorie

Cover von Archibald Williams: Romance Of Modern Mechanism

Archibald Williams: Romance Of Modern Mechanism

The Romance of Modern Mechanism‘ is a book written by Archibald Williams, first published in 1906. The book explores the technological advancements of the time, focusing on the mechanics and engineer …

Cover von Chun-Qing (RMIT University, Australia) Li & Wei (University of Melbourne, Australia) Yang: Steel Corrosion and Degradation of its Mechanical Properties

Chun-Qing (RMIT University, Australia) Li & Wei (University of Melbourne, Australia) Yang: Steel Corrosion and Degradation of its Mechanical Properties

This book presents the state-of-the-art-knowledge on corrosion of steel, cast iron and ductile iron with a focus on corrosion-induced degradation of their mechanical properties. The information prese …

Cover von John Phillip (University of Newcastle, UK) Carter & Chandrakant S. (University of Arizona, Tucson, USA) Desai: DSC/HISS Modeling Applications for Problems in Mechanics, Geomechanics, and Structural Mechanics

John Phillip (University of Newcastle, UK) Carter & Chandrakant S. (University of Arizona, Tucson, USA) Desai: DSC/HISS Modeling Applications for Problems in Mechanics, Geomechanics, and Structural Mechanics

Understanding the mechanical behavior of solids and contacts (interfaces and joints) is vital for the analysis, design, and maintenance of engineering systems. Materials may simultaneously experience …

Cover von Basuraj (University College Dublin, Ireland) Bhowmik & Budhaditya Hazra: Advanced Steel Design of Structures

Basuraj (University College Dublin, Ireland) Bhowmik & Budhaditya Hazra: Advanced Steel Design of Structures

Advanced Steel Design of Structures examines the design principles of steel members under special loads and covers special geometric forms and conditions not typically presented in standard design bo …

Cover von Julio Florez-Lopez & Maria Eugenia Marante: Fracture and Damage Mechanics for Structural Engineering of Frames: State-of-the-Art Industrial Applications

Julio Florez-Lopez & Maria Eugenia Marante: Fracture and Damage Mechanics for Structural Engineering of Frames: State-of-the-Art Industrial Applications

Cover von Frank (University of Colorado, Boulder, USA (retired)) Kreith & Paul (NREL, Golden, Colorado, USA) Norton: Air Conditioning and Refrigeration Engineering

Frank (University of Colorado, Boulder, USA (retired)) Kreith & Paul (NREL, Golden, Colorado, USA) Norton: Air Conditioning and Refrigeration Engineering

An air conditioning system consists of components and equipment arranged in sequential order to control and maintain an indoor environment. The goal is to provide a healthy and comfortable climate wi …

Cover von Wioletta (Warsaw University of Technology, Warszawa, Poland) Podgorska: Multiphase Particulate Systems in Turbulent Flows

Wioletta (Warsaw University of Technology, Warszawa, Poland) Podgorska: Multiphase Particulate Systems in Turbulent Flows

Multiphase Particulate Systems in Turbulent Flows: Fluid-Liquid and Solid-Liquid Dispersions provides methods necessary to analyze complex particulate systems and related phenomena including physical …

Cover von David (Consultant, Australia) Chadderton: Air Conditioning

David (Consultant, Australia) Chadderton: Air Conditioning

David Chadderton“s Air Conditioning is the complete introduction and reference guide for students and practitioners of air conditioning design, installation and maintenance. The scientific principle …

Cover von Holger Martin: Heat Exchangers

Holger Martin: Heat Exchangers

This is a text/reference illustrating thermal and hydraulic design of heat exchangers. The book shows how to apply the fundamentals of thermodynamics, heat transfer, and fluid dynamics for a systemat …

Cover von Liang-Wen (National Formosa University) Ji & Artde Donald Kin-Tak (Fujian University of Technology, China) Lam: System Innovation for a Troubled World

Liang-Wen (National Formosa University) Ji & Artde Donald Kin-Tak (Fujian University of Technology, China) Lam: System Innovation for a Troubled World

System Innovation for a Troubled World: Applied System Innovation VIII contains roughly one tenth of the total of 250 contributions from 8 different countries that were presented at the IEEE 8th Inte …

nächste Seite >>>